Browsing by Author "Doğan, Oguz"
Now showing 1 - 2 of 2
- Results Per Page
- Sort Options
Publication A comparative 3d finite element computational study of stress distribution and stress transfer in small-diameter conical dental implants(Univ Osijek, Tech Fac, 2021-12-01) Doğan, Oğuz; Dhanasekaran, Lokesh; Khandaker, Morshed; Kalay, Onur Can; Karaman, Hasan; Karpat, Fatih; KARPAT, FATİH; Doğan, Oguz; DOĞAN, OĞUZ; Yuce, Celalettin; YÜCE, CELALETTİN; Karpat, Esin; KARPAT, ESİN; Dhanasekaran, Lokesh; Khandaker, Morshed; Bursa Uludağ Üniversitesi/Mühendislik Fakültesi.; Bursa Uludağ Üniversitesi/Mühendislik Fakültesi/Elektrik Elektronik Mühendisliği.; 0000-0001-8643-6910; 0000-0001-8474-7328; 0000-0003-1387-907X; 0000-0001-5985-7402; A-5259-2018; GXH-1702-2022; AAV-7897-2020; R-3733-2017The implant design is one of the main factors in implant stability because it affects the contact area between the bone and the implant surface and the stressstrain distribution at the bone-implant interface. In this study, the effect of different groove geometries on stress-strain distributions in small-diameter conical implants is investigated using the finite element method (FEM). Four different thread models (rectangular, buttressed, reverse buttressed, and symmetrical profile) are created by changing the groove geometry on the one-piece implants, and the obtained results are compared. The stress shielding effect is investigated through the dimensionless numbers that characterize the load-sharing between the bone-implant. It is determined that the lowest stress distribution is observed with rectangular profiled groove geometry. Besides, it is obtained that the buttressed groove geometry minimizes the stress effects transmitted to the periphery of the implant. The symmetrical profiles had better performance than rectangular profiles in stress transfer.Publication Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life(Elsevier, 2021-02-12) Doğan, Oguz; Yüce, Celalettin; Karpat, Fatih; KARPAT, FATİH; Bursa Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü; 0000-0001-8474-7328; A-5259-2018Gears are the most significant machine elements in power transmission systems. They are used in almost every area of the industry, such as small watches to wind turbines. During the power transmission, gears are subjected to high loads, even unstable conditions, high impact force can be seen. Due to these unexpected conditions, cracks can be seen on the gear surfaces. Moreover, these cracks can propagate, and tooth or body failures can be seen. The fatigue propagation life is related to the gear tooth root stress. If the root stresses decrease, the fatigue life of the gears will increase. In this study, standard and non-standard (asymmetric) gear geometries are formed for four different rim thicknesses and four different pressure angles to examine fatigue crack prop-agation life. Moreover, the effects of the rim thickness and drive side pressure angle on the root stress are investigated. The static stress analyses are carried out to determine the starting points of the cracks, and the maximum point of the stress is defined as the starting point of the cracks. Fatigue crack propagation analyzes are performed for gears whose crack starting points are determined. The static stress analyses are conducted in ANSYS Workbench; similarly, the fatigue propagation analysis is performed in ANSYS smart crack growth. In this way, the directions of the cracks are determined for different rim thicknesses and drive side pressure angles. Besides, the number of cycles and da/dN graphs is obtained for all cases depending on crack propagation. As a result of the study, maximum stress values were decreased by 66%. The fatigue propagation life was increased approximately fifteen times by using the maximum drive side pressure angle and optimum rim thickness.