Application of nanofiltration and reverse osmosis for tanning wastewater

No Thumbnail Available

Date

2014-06

Journal Title

Journal ISSN

Volume Title

Publisher

Springer

Abstract

The aim to achieve in this study is to recover the Cr(III) and process waters' used in the wastewaters of chrome tanning operation by membrane process during leather production. In the treatment alternative contains, cartridge filter, nanofiltration (NF(NP10)), nanofiltration NF(XN45) and reverse osmosis RO(ACM2) membranes. The raw chrome wastewater from the cartridge filter was given to NF(NP10) membranes with 3 different pressures (12bar, 16bar, 18bar). In this alternative, the most appropriate pressure is determined as 20 bar and the COD, Cr(III) and SS values were detected as, in order, 65%, 49% and 87% for the removal efficiency. 2,7 times more concentration for Cr(III) was achieved in the NF (XN45) membrane, which was used after NF(NP10) membrane and COD, SS, SO4-2, Na+ and conductivity parameters showed removal efficiencies as, 75%, 89%, 95%, 38% and 16%. The permeate from RO(ACM2) membrane was decreased to the discharge criteria's; (Cr(III):2 mg/L, COD: 200 mg/L). As a result, the investment and the process cost of these membranes are more feasible.

Description

Keywords

Chromium, Wastewater, Concentration (composition), Water treatment, Cost, Waste treatment, Discharge, Filtration, Membrane, Osmosis, Ultrafiltration membranes, Behavior, Tannery effluents, Pollution, Chromium recovery, Chemicals, Reuse, Wastewaters, Industry, Removal, Environmental sciences & ecology, Cost, Cr(III), Removal efficiency, Nanofiltration, Reverse osmosis

Citation

Kiril, M. B. ve Kestioǧlu, K. (2014). "Application of nanofiltration and reverse osmosis for tanning wastewater". International Journal of Environmental Research, 8(3), 789-798.

Collections