Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steels
dc.contributor.buuauthor | Peksöz, Ahmet | |
dc.contributor.buuauthor | Erdem, Sezer | |
dc.contributor.buuauthor | Derebaşı, Naim | |
dc.contributor.department | Uludağ Üniversitesi/Fen-Edebiyat Fakültesi/Fizik Bölümü. | tr_TR |
dc.contributor.orcid | 0000-0003-2546-0022 | tr_TR |
dc.contributor.researcherid | AAI-2254-2021 | tr_TR |
dc.contributor.researcherid | AAG-9772-2021 | tr_TR |
dc.contributor.researcherid | AAI-1248-2021 | tr_TR |
dc.contributor.scopusid | 23100976500 | tr_TR |
dc.contributor.scopusid | 13805689400 | tr_TR |
dc.contributor.scopusid | 11540936300 | tr_TR |
dc.date.accessioned | 2021-12-09T11:25:16Z | |
dc.date.available | 2021-12-09T11:25:16Z | |
dc.date.issued | 2008-10 | |
dc.description.abstract | Basic magnetic properties of non-oriented electrical steel sheets with different grain size and silicon content have different behaviour before and after cutting into strips. Cutting process causes a significant drop in flux density and deterioration of magnetic properties occurs over a region up to 10 mm from close to the cut edge. Therefore some degraded regions are formed at each side of the cut. A new mathematical model was formed for the degree of deterioration on flux distribution near the cut edge. The variation of magnetic induction in the cutting region was given as a function of four different parameters depending on the material. The model also included the variation of these parameters with the grain size and silicon content. It is observed that the change in the parameters until 2.5% Si content is not significant, while it has a remarkable variation for them after 2.5% Si content and similar effect was found to be for grain size. The mathematical model gives the degree to which the magnetic properties of the region around the edge degrade after the cutting process. The calculated results of the model showed good agreements with the experimental results. | en_US |
dc.identifier.citation | Peksöz, A. vd. (2008). ''Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steels''. Computational Materials Science, 43(4), 1066-1068. | en_US |
dc.identifier.endpage | 1068 | tr_TR |
dc.identifier.issn | 0927-0256 | |
dc.identifier.issue | 4 | tr_TR |
dc.identifier.scopus | 2-s2.0-52949097259 | tr_TR |
dc.identifier.startpage | 1066 | tr_TR |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0927025608001389 | |
dc.identifier.uri | https://doi.org/10.1016/j.commatsci.2008.02.025 | |
dc.identifier.uri | http://hdl.handle.net/11452/23132 | |
dc.identifier.volume | 43 | tr_TR |
dc.identifier.wos | 000260916900062 | tr_TR |
dc.indexed.scopus | Scopus | en_US |
dc.indexed.wos | SCIE | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier | en_US |
dc.relation.journal | Computational Materials Science | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi | tr_TR |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Cutting effect | en_US |
dc.subject | Cutting process | en_US |
dc.subject | Electrical steels | en_US |
dc.subject | Flux distribution | en_US |
dc.subject | Magnetic flux distribution | en_US |
dc.subject | Magnetic materials | en_US |
dc.subject | Magnetic properties | en_US |
dc.subject | Cutting tools | en_US |
dc.subject | Deterioration | en_US |
dc.subject | Functions | en_US |
dc.subject | Grain size and shapev | en_US |
dc.subject | Magnetic fields | en_US |
dc.subject | Magnetic flux | en_US |
dc.subject | Magnetic properties | en_US |
dc.subject | Magnetism | en_US |
dc.subject | Mathematical techniques | en_US |
dc.subject | Nonmetals | en_US |
dc.subject | Silicon | en_US |
dc.subject | Silicon steel | en_US |
dc.subject | Steel sheet | en_US |
dc.subject | Before and after | en_US |
dc.subject | Cut edges | en_US |
dc.subject | Cutting process | en_US |
dc.subject | Electrical steels | en_US |
dc.subject | Flux densities | en_US |
dc.subject | Flux distribution | en_US |
dc.subject | Grain sizes | en_US |
dc.subject | Magnetic flux distribution | en_US |
dc.subject | Magnetic induction | en_US |
dc.subject | New mathematical model | en_US |
dc.subject | Non-oriented electrical steels | en_US |
dc.subject | SI content | en_US |
dc.subject | Silicon contents | en_US |
dc.subject | Mathematical models | en_US |
dc.subject | Materials science | en_US |
dc.subject | Non-oriented electrical steel sheets | en_US |
dc.subject.scopus | Silicon Steel; Punching; Soft Magnetic Materials | en_US |
dc.subject.wos | Materials science, multidisciplinary | en_US |
dc.title | Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steels | en_US |
dc.type | Article | |
dc.wos.quartile | Q2 | en_US |
Files
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.71 KB
- Format:
- Item-specific license agreed upon to submission
- Description: