Publication: Influence of the tool geometry and process parameters on the static strength and hardness of friction-stir spot-welded aluminium-alloy sheets
dc.contributor.author | Güler, Hande | |
dc.contributor.buuauthor | GÜLER ÖZGÜL, HANDE | |
dc.contributor.department | Uludağ Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü | |
dc.contributor.orcid | 0000-0001-8589-6931 | |
dc.contributor.researcherid | GWU-9651-2022 | |
dc.date.accessioned | 2024-08-06T07:26:03Z | |
dc.date.available | 2024-08-06T07:26:03Z | |
dc.date.issued | 2015-01-01 | |
dc.description.abstract | In this study, the effects of the tool geometry and welding parameters on the friction-stir spot-welding properties of AA 5754-H111 were studied. Two different tool-pin geometries were used and tensile shear tests were carried out to compare the weld strength. Hardness observations were also done. The optimum tool geometry for the mentioned material was determined as the circular pin tool and the tapered pin tool gave the lowest tensile shear load. | |
dc.identifier.doi | :10.17222/mit.2014.087 | |
dc.identifier.eissn | 1580-3414 | |
dc.identifier.endpage | 460 | |
dc.identifier.issn | 1580-2949 | |
dc.identifier.issue | 3 | |
dc.identifier.startpage | 457 | |
dc.identifier.uri | https://doi.org/:10.17222/mit.2014.087 | |
dc.identifier.uri | https://hdl.handle.net/11452/43739 | |
dc.identifier.volume | 49 | |
dc.identifier.wos | 000354018700023 | |
dc.indexed.wos | WOS.SCI | |
dc.language.iso | en | |
dc.publisher | Materiali in Tehnologie | |
dc.relation.journal | Materiali In Tehnologije | |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi | |
dc.rights | info:eu-repo/semantics/closedAccess | |
dc.subject | Al-alloys | |
dc.subject | Friction-stir spot welding | |
dc.subject | Mechanical properties | |
dc.subject | Hardness | |
dc.subject | Science & technology | |
dc.subject | Technology | |
dc.subject | Materials science, multidisciplinary | |
dc.subject | Metallurgy & metallurgical engineering | |
dc.subject | Materials science | |
dc.title | Influence of the tool geometry and process parameters on the static strength and hardness of friction-stir spot-welded aluminium-alloy sheets | |
dc.type | Article | |
dspace.entity.type | Publication | |
relation.isAuthorOfPublication | 8da632da-3d3c-4ef7-a258-7cb92cc314fe | |
relation.isAuthorOfPublication.latestForDiscovery | 8da632da-3d3c-4ef7-a258-7cb92cc314fe |