Publication: Effect of temperature and rolling direction on the formability of cp2 and ti-6al-4v titanium materials
dc.contributor.buuauthor | Gökmen, Şaban | |
dc.contributor.buuauthor | Ertan, Rukiye | |
dc.contributor.buuauthor | ERTAN, RUKİYE | |
dc.contributor.buuauthor | Özgül, Hande Güler | |
dc.contributor.buuauthor | GÜLER ÖZGÜL, HANDE | |
dc.contributor.department | Bursa Uludağ Üniversitesi/Mühendislik Fakültesi. | |
dc.contributor.researcherid | GWU-9651-2022 | |
dc.contributor.researcherid | KIH-2391-2024 | |
dc.date.accessioned | 2024-09-16T07:18:48Z | |
dc.date.available | 2024-09-16T07:18:48Z | |
dc.date.issued | 2023-09-13 | |
dc.description.abstract | Pure (CP2) and alloyed titanium (Ti-6Al-4V) have an important place in biomedical and aerospace applications due to their low density and high strength properties. In this study, the effect of the formability of CP2 and Ti-6Al-4V titanium alloy at different temperatures on mechanical properties and microstructure was investigated. The hot forming process was carried out by pressing 1 mm sheet titanium plates at different temperatures on the U profile mold. Specimens along the rolling direction and perpendicular to the rolling direction were taken from the bottom the formed U-plates. Afterward, tensile tests, microhardness measurements, and changes in microstructure were examined, respectively. As a result, at high temperatures and in different rolling directions, significant changes in microstructure and mechanical properties were observed. It was determined that the best forming temperature of CP2 and Ti-6Al-4V materials along the rolling direction was 500 degrees C, white it is 400 degrees for perpendicular to the rolling direction was 400 degrees C. | |
dc.identifier.doi | 10.1515/mt-2023-0117 | |
dc.identifier.endpage | 1751 | |
dc.identifier.issn | 0025-5300 | |
dc.identifier.issue | 11 | |
dc.identifier.startpage | 1743 | |
dc.identifier.uri | https://doi.org/10.1515/mt-2023-0117 | |
dc.identifier.uri | https://hdl.handle.net/11452/44764 | |
dc.identifier.volume | 65 | |
dc.identifier.wos | 001066004900001 | |
dc.indexed.wos | WOS.SCI | |
dc.language.iso | en | |
dc.publisher | Walter De Gruyter Gmbh | |
dc.relation.journal | Materials Testing | |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi | |
dc.rights | info:eu-repo/semantics/closedAccess | |
dc.subject | Microstructure | |
dc.subject | Cp2 | |
dc.subject | Ti-6al-4v | |
dc.subject | Hot forming | |
dc.subject | Mechanical properties | |
dc.subject | Microstructure | |
dc.subject | Science & technology | |
dc.subject | Technology | |
dc.subject | Materials science, characterization & testing | |
dc.subject | Materials science | |
dc.title | Effect of temperature and rolling direction on the formability of cp2 and ti-6al-4v titanium materials | |
dc.type | Article | |
dspace.entity.type | Publication | |
relation.isAuthorOfPublication | f7496991-8ca2-46c1-ba7d-585eac482be2 | |
relation.isAuthorOfPublication | 8da632da-3d3c-4ef7-a258-7cb92cc314fe | |
relation.isAuthorOfPublication.latestForDiscovery | f7496991-8ca2-46c1-ba7d-585eac482be2 |